Computer Setup-Boot - HP Pro 2110 Small Form Factor Maintenance & Service Manual

Table 2-3
Option
MAX DVMT
Allocation
Onboard HD Audio
OnChip USB
Controller
USB Legacy Support
Onboard LAN
Onboard LAN Boot
ROM
Onboard Serial Port
1
Computer Setup—Boot
NOTE:
Support for specific Computer Setup options may vary depending on the hardware
configuration.
Table 2-4
Option
ESC Boot Menu
F9 Diagnostics
F10 Setup Prompt
F11 Recovery
8 Chapter 2 Computer Setup (F10) Utility
Computer Setup—Advanced (continued)
Description
Allows you to specify the DVMT/system memory allocated for video memory:
● 128MB
256MB
●
● Max
Allows you to disable/enable onboard HD audio.
Disables/enables the universal host controller interface for USB (Universal Serial Bus).
Disables/enables USB legacy support function (USB keyboard, USB mouse, and USB flash media).
Disables/enables onboard LAN controller.
Disables/enables the boot ROM of the onboard LAN chip.
Allows you to select a setting for the onboard serial port:
Disabled
●
3F8/IRQ4
●
● 2F8/IRQ3
3E8/IRQ4
●
● 2E8/IRQ3
Computer Setup—Boot
Description
Allows you to enable/disable the option to press the
computer startup.
Disables/enables F9 Boot Menu prompt message on the logo screen.
Disables/enables the F10 Setup prompt message on the logo screen.
Disables/enables F11 Recovery and provides the option of showing the F11 Recovery prompt
message on the logo screen. Choose from the following:
Disabled
●
Enabled no prompt
●
Enabled and prompt
●
ESC key to access the Boot menu during