HP Pro 2110 Small Form Factor Maintenance & Service Manual page 125

The 3.5-inch hard drive is located under the optical drive. To remove the hard drive:
1. Prepare the computer for disassembly
2. Remove the access panel
3. Remove the front bezel
4. Remove the system fan
5. Remove the optical drive
6.
Disconnect the power cable and data cable from the back of the hard drive.
7.
Remove the four screws securing the drive cage assembly to the PC – one at the top of the
assembly and three on the front of the PC.
Figure 6-25 Hard drive cage screw location – top
Figure 6-26
Hard drive cage screw location – front
(Preparation for Disassembly on page
(Access Panel on page
(Front Bezel on page 89).
(System Fan on page 103).
(Removing the Optical Drive on page
88).
113).
87).
Drives 115