Computer Setup-Exit; Recovering The Configuration Settings - HP Omni Pro 110 Maintenance & Service Manual

Table 3-4 Computer Setup—Boot (continued)
Hard Drive Group
Boot Priority
Network Group Boot
Priority
Computer Setup—Exit
NOTE: Support for specific Computer Setup options may vary depending on the hardware
configuration.
Table 3-5 Computer Setup—Exit
Option
Exit Saving Changes
Exit Discarding
Changes
Load Setup Defaults
Discard Changes
Save Changes

Recovering the Configuration Settings

To reset all BIOS Setup options to their default values (including options for Ctrl+F10), you must enter
F10 Setup mode and press F5.
This does not include updates to system date, system time, supervisor password, user
password, and CPU frequency multiplier.
Specifies boot device priority within hard drives.
Specifies boot device priority within bootable network devices.
Description
Press Enter to exit saving changes.
Press Enter to exit discarding changes.
Press Enter to load setup defaults.
Press Enter to discard changes.
Press Enter to save changes.
Recovering the Configuration Settings 11