Configuring The Print Server From An Ibm Host - Axis 570 User Manual

AXIS 570/670 User's Manual

Configuring the Print Server from an IBM host

Once communication with an IBM host has been established, all the
AXIS 570/670 parameters can be edited by printing a file containing
special configuration commands. To start the configuration, the
command is entered in the file. To protect your settings, a
%CONFIG+
password must be provided. By default, the password is
all parameters are set, the command
parameters permanently. The command
configuration mode and resumes normal printing. The syntax for the
file to print is:
%CONFIG+ <password;>
IBM_PRINTING_PARAMETER_NAME = VALUE;
SAVE;
%CONFIG-
In order to maintain backward compatibility and increase security,
many parameters that are not related to the IBM printing operation
have to be preceded by the
parameters are set, enter
are clearly marked in the parameter listing on the
%CONFIG++
following pages.
%CONFIG+ <password;>
IBM_PRINTING_PARAMETER_NAME = VALUE;
%CONFIG++
PARAMETER_NAME = VALUE;
%CONFIG--
SAVE;
%CONFIG-
Section 11: Management & Configuration
is used to store the
SAVE
%CONFIG-
command. When all
%CONFIG++
. The parameters requiring
%CONFIG--
. When
pass
leaves the
191