Axis 570 User Manual page 47

Section 3: Basic Installation
46
Using BOOTP
Follow the instructions below to set the IP address using BOOTP:
in UNIX
1. Append the following entry to your boot table. This is typically
performed by editing the file:
<host name>:ht=<hardware type>:vm=<vendor magic>:\
:ha=<hardware address>:ip=<IP address>:\
:sm=<subnet mask>:gw=<gateway field>
Example - AXIS 570/570e Ethernet Print Servers:
npsname:ht=ether:vm=rfc1048:\
:ha=00408c100086:ip=192.168.3.191:\
:sm=255.255.255.0:gw=192.168.1.1
Example - AXIS 670/670e Token Ring Print Servers:
npsname:ht=tr:vm=rfc1048:\
:ha=000231480061:ip=192.168.3.191:\
:sm=255.255.255.0:gw=192.168.1.1
Enter the
Notes:
The
ha
field is the IP address of your AXIS 570/670.
The
gw
subnet mask.
2. If necessary, update your host table and alias name databases, as
required by your system.
3. If it is not already running, start the BOOTP daemon. This is
typically performed using the
4. Restart the AXIS 570/670 to download the IP address, default
router address, and subnet mask.
and fields exactly as shown in the example.
ht vm
field is the Ethernet address/node address and the
and fields correspond to the default router address and
sm
AXIS 570/670 User's Manual
/etc/bootptab
command.
bootpd
ip