Axis 570 User Manual page 38

AXIS 570/670 User's Manual
Methods for
downloading
the IP Address
Note:
Assigning a
Host Name
to the IP address
Note:
You can set the IP address using one of the following methods,
depending on your network operating environment:
Method Network environments
AXIS IP Installer Windows 95/98/NT
DHCP Windows NT, UNIX
Windows 95/98/NT
ARP
UNIX
RARP UNIX
BOOTP UNIX
Windows 95/98/NT, OS/2,
Manual setting
NetWare
The ARP and RARP methods operate on single network segments
only, i.e. they cannot be used over routers.
If you are using host names, you can map a unique host name to the
obtained IP address. Refer to your system manuals or to your network
administrator for instructions on how to perform name mapping on
your system.
The AXIS 570/670 supports WINS (Windows Internet Name
Service), which is recommended when you are using DHCP in a
Windows NT network.
If the host name has not been mapped to the IP address, you can
still perform the following instructions on how to download the
IP address. In this case, simply replace the host name entry with
the IP address wherever required.
Section 3: Basic Installation
See ...
page 38
page 39
page 40
page 42
page 44
page 46
Basic Setup with
AXIS NetPilot , on
page 32
37