Axis 570 User Manual page 86

AXIS 570/670 User's Manual
Notes:
Notes:
These entries must correlate to the IBM Printer Emulation
(PREMUL) parameter setting within the AXIS 570/670.
The IBM Printer Emulation (PREMUL) parameter is explained in
Appendix A - SNA Parameter Overview.
PREMUL
5224_TX
5225_TX
5226_TX
4214_TX
4230_TX
3812_TX
3816_TX
3816S_TX
6. Define the Attached controller (CTL). This entry
must match the name of the Virtual controller, created
previously.
7. Enter a FGID number at the
Lists of all supported FGIDs are available in Appendix G - IPDS
Fonts, on page 239 and Appendix D - IBM Fonts, on page 225.
8. Press the ENTER key to create the virtual printer
A message Output queue AX570PR1 in QUSRSYS
already exists (or similar) may be returned after pressing
the ENTER key. This message can be disregarded.
Several virtual printers and output queues can be attached to the
virtual controller. This is useful if you want to choose different
Logical Printers in the AXIS 570/670 when sending print jobs
from the host.
Section 4: Setting Up - AS/400
Device Type Device Model
5224 1
5225 1
5226 1
4214 2
4214 2
3812 1
3812 1
3812 1
Font Identifier (FONT)
85
line.