Axis 570 User Manual page 71

Section 4: Setting Up - AS/400
70
Configuring the
AXIS 570/670
Example cont:
Remote network identifier. . . . . RMTNETID
Workstation customizing object . . WSCST
Library. . . . . . . . . . . .
Authority. . . . . . . . . . . . . AUT
Follow the instructions below to configure your AXIS 570/670 for
Raw TCP/IP printing using a standard Web browser:
1. Start a Web browser, e.g. Internet Explorer or Netscape Navigator.
2. Enter the IP address or the host name of the AXIS 570/670 in the
location field and press the ENTER key on your keyboard. The
internal Web pages of the AXIS 570/670 appear. You may be
asked to enter a user name and a password. The default values are
root and pass, respectively.
3. Click the Configuration button.
4. Select TCP/IP from the header.
5. The Reverse Telnet parameters PR4, PR5 and PR6 are by default
setup for SCS data streams, on the port numbers 5011, 5012 and
5013 respectively. If you need to change a port number, enter the
new number in the text field and click the Submit TCP/IP
settings button. Otherwise you do not have to do anything.
6. Select IBM BASIC CONFIGURATION from the header.
7. Select your preferred system language from the System Language
drop-down list.
8. Select a printer emulation from the Printer Emulation drop-down
list.
AS/400 hosts only support laser printers when using Raw
Note:
TCP/IP. Therefore you can only use the twinax emulations
3812_TX, 3816S_TX and 3816_TX.
AXIS 570/670 User's Manual
Additional parameters
*NETATR
*NONE
*LIBCRTAUT
Bottom