Configuring Your Print Server - Installation Guide - Axis 5800 User Manual

Section 4 Basic Installation (Cable & Wireless)
36

Configuring your print server - Installation Guide

Configuration Methods
Environment
Wireless
printing
Windows
NetWare
Macintosh
UNIX/Linux
Once you have set the IP address of your AXIS 5800+ Mobile
print server, it can be managed and configured using a number
of different methods. The method that you choose should be
dictated by your printing requirements and your supported
network environments. Select the appropriate method from the
table below:
Network Configuration
TCP/IP
NetBIOS/NetBEUI
IPP
IP/IPX in PSERVER mode
IP/IPX in Remote Printer
mode
AppleTalk
TCP/IP
IPP
Note:
• Installation instructions for Windows 3.1, WfW and OS/2 are
found on www.axis.com and the AXIS Network Product CD.
AXIS 5800+ Mobile User's Manual
Action
See Wireless Printing, on page 95
See Section 5 Setting Up - Windows, on page 37
See Section 5 Setting Up - Windows, on page 37
Proceed with IPP - Internet Printing Protocol, on page 82
See Installing the AXIS 5800+ Mobile in an NDPS environments, on
page 62 and then
Setup using Queue-based printing over IP/IPX in PSERVER Mode,
on page 64
See Installing the AXIS 5800+ Mobile in an NDPS environments, on
page 62 and then
Setup for Queue-based printing over IPX/SPX (Remote Printer
Mode), on page 66
See Section 7 Setting Up - Macintosh, on page 79
Proceed with Section 8 Setting Up - UNIX, on page 76
Proceed with IPP - Internet Printing Protocol, on page 82