Axis 570 User Manual page 216

AXIS 570/670 User's Manual
Notes:
Printer devices will be named "A201PRT01", A201PRT02",
A201PRT02"... The designation "PRTnn" corresponds to the logical
printers in the Print Server, i.e. printer device "A201PRT01" will be
mapped to Logical Printer #1. By default, all Logical Printers are
mapped to the Physical Port LPT1.
Proceed to the SNA Printing - 5494 Mode, on page 51 to customize
the Print Server.
AXIS 570 and AXIS 670 only: The setting of the N_PRT_DEV
parameter defines the maximum number of printer device
descriptions that will be created. The default is 3, although a
range of 1-8 is allowed.
AXIS 570 and AXIS 670 only: If the N_PRT_DEV parameter is
set to 3, device descriptions for local location addresses 01-03 are
relevant. If the setting is 1, only local location address 01 will be
available.
Appendix A: SNA Parameter Overview
215