Windows 95 And Windows 98 - Axis 570 User Manual

Section 7: Setting Up - Windows
126

Windows 95 and Windows 98

Using the
AXIS Print Monitor
with Windows 95/98
NetBIOS/NetBEUI
Follow the procedures below to install Axis printer ports from a
Windows 95 or Windows 98 workstation:
1. To start the Add Printer Wizard, select Settings - Printers from
the Start menu and double-click the Add Printer icon.
2. After clicking Next> in the first dialog, the Wizard asks you to
select Local printer or Network printer. Select Local printer as the
AXIS 570/670 emulates a local printer port. Click Next>.
3. Choose the appropriate printer driver for your printer. If the
desired printer driver appears in the displayed Manufacturers and
Printer Models lists, highlight your selection, click Next> and
proceed directly to step 6. It is only necessary to perform steps 4 -
5 if your printer does not appear in the model list.
Even if the desired printer is available in the Manufacturers and
Note:
Printer Models list, you are advised to use the printer driver
provided with the printer. This assures you of the latest driver
software.
4. Click the Have Disk... button. Insert the printer driver
diskette/CD that was provided with your printer, select the
appropriate diskette/CD drive and click OK.
5. Select the printer driver you want to install and click Next>.
6. Select the AXIS Printer Port from the Available Ports list. The
port names appear as <name>.LP1, <name>.LP2, and
<name>.CM1, where <name> is AX followed by the last six digits
of the AXIS 570/670 serial number, e.g. AX100086. Click the
Configure Port button.
7. Choose whether error condition pop-up messages are to be
displayed by checking the box in the Configure AXIS Printer
Ports dialog. Define the frequency at which the error messages
should be displayed after retry. Click Next>.
AXIS 570/670 User's Manual