Axis 570 User Manual page 42

AXIS 570/670 User's Manual
Notes:
AXIS 670/670e Token Ring Print Servers:
1. Start a DOS window.
2. Type the following commands:
arp -s 802.5 <IP address> <Node address>
ping <IP address>
arp -d <IP address>
Example
arp -s 802.5 192.168.3.191 00-02-31-48-00-61
ping 192.168.3.191
arp -d 192.168.3.191
The host will return Reply from 192.168.3.191 ... or a
similar message. This indicates that the address has been set and that
communication is established.
The
Node address
found on the underside label of the AXIS 670/670e.
When using the Windows 95 implementation of ARP, change the
first line to:
arp -s <IP address> <Ethernet address> <w95host IP
, where
address>
your Windows 95 host.
When you execute the
experience a significantly longer response time than is usual.
By using the
arp -d
removed from the host's cache memory.
Section 3: Basic Installation
is equal to the serial number, which can be
<w95host IP address>
command for the first time, you will
ping
command, the static entry in the arp table is
is the IP address of
41