Axis 570 User Manual page 83

Section 4: Setting Up - AS/400
82
3. Type QUSRSYS at the Library line.
4. Define the Remote system (RMTSYS). This entry must be
the same as the TCP/IP host table name, defined in the previous
example, e.g. AXIS570.
5. Define the Remote printer queue (RMTPRTQ). This
entry refers to an internal printer queue in the Print Server, which
is sent with the print job and used to specify which Logical Printer
in the Print Server is to be used for each job. The legal choices are
defined in the table below:
Printer Queue Name
SCSPR1
SCSPR2
SCSPR3
SCSPR4
SCSPR5
SCSPR6
SCSPR7
SCSPR8
6. Enter 1 as the number of Writers to autostart
(AUTOSTRWTR).
7. Enter *IP at the Connection type (CNNTYPE) line to
indicate TCP/IP as the transport protocol for the SCS data
stream.
8. Type *OTHER at the Destination type (DESTTYPE)
line.
9. The Host Print transform (TRANSFORM) entry
specifies if the AS/400 will do EBCDIC-to-ASCII transformation
of the print data. Enter *NO, since this is done in the Print Server.
10. Press the ENTER key to create the queue.
AXIS 570/670 User's Manual
Logical Printer Destination
PR1
PR2
PR3
PR4
PR5
PR6
PR7
PR8