Configuring The Axis 570/670; Verifying The Communications Link - Axis 570 User Manual

Appendix H: DBCS Support
256

Configuring the AXIS 570/670

Verifying the Communications Link

A number of printer emulations exist for DBCS printing and you are
advised to set the correct system language. To do this, follow the
instructions below:
1. Perform steps 1-7 as detailed in Configuring the AXIS 570/670, on
page 54.
2. From the IBM Printer Emulation tab ensure that the basic
configuration parameters are defined as follows:
Country
Korea (KS)
Korea (KSSM) 5x27_002_TX_KSSM
Japan
China
Printer Emulation and System Language for Country options
3. Perform steps 9-12 as detailed in Configuring the AXIS 570/670,
on page 54.
Default fonts will be changed when switching printer emulations.
Note:
Having configured the AS/400 host AXIS 570/670 in accordance with
the above, verify that the communications link is functioning correctly
by following instructions 1-4 detailed in Verifying the Communication
Link, on page 57.
AXIS 570/670 User's Manual
Printer Emulation System Language
5x27_002_TX_KS 833
833
5x27_001_TX 890
5x27_005_TX 836