Configuring The Print Server From An Ibm Host - Axis 27980R1 User Manual

Configuring the Print Server from an IBM Host

AXIS 5570e User's Manual
NetWare Print Layout with corresponding information summary
Once communication with an IBM host has been established, all the Axis
Network Print Server parameters can be edited by printing a file
containing special configuration commands. To start the configuration,
the command
%CONFIG+
password must be provided. By default, the password is pass. When all
parameters are set, the command
permanently. The command
resumes normal printing. The syntax for the file to print is:
%CONFIG+ <password;>
IBM_PRINTING_PARAMETER_NAME = VALUE;
SAVE;
%CONFIG-
In order to maintain backward compatibility and increase security, many
parameters that are not related to the IBM printing operation have to be
preceded by the
%CONFIG++
. The parameters requiring
%CONFIG--
parameter listing on the following pages.
%CONFIG+ <password;>
IBM_PRINTING_PARAMETER_NAME = VALUE;
%CONFIG++
PARAMETER_NAME = VALUE;
%CONFIG--
SAVE;
%CONFIG-
Management and Configuration
is entered in the file. To protect your settings, a
is used to store the parameters
SAVE
leaves the configuration mode and
%CONFIG-
command. When all parameters are set, enter
%CONFIG++
are clearly marked in the
141