Axis 570 User Manual page 58

AXIS 570/670 User's Manual
Verifying the
Communication Link
1. Type WRKCFGSTS *CTL xxxx* on the AS/400 command
line where xxxx is the first four characters of the AXIS 570/670
LU Name. After a couple of minutes, ensure that the following
items are displayed:
• One APPC controller with the same name as the AXIS
570/670 LU Name.
• One APPC device with the same name as the AXIS 570/670
LU Name, one controller session (QRMTWSC) and the
currently active (default = 3) printer sessions(QRMTWSC).
• One twinax controller named xxxxxRMT, where xxxxx is
the first five characters of the AXIS 570/670 LU Name.
• Three twinax printer devices named xxxxPRT0z where
xxxx is the first four characters of the AXIS 570/670
LU Name and z is the printer device number.
The status of all items should now be ACTIVE or VARIED ON.
2. Type STRPRTWTR xxxxPRT0z on the AS/400 command
line, where xxxxPRT0z is the printer device name. This
command starts the writer for this printer device.
3. Press the AXIS 570/670 test button once to print a test page.
Ensure that the SNA status is defined on the test page as
or .
Actv LU-4
Section 4: Setting Up - AS/400
57
,
Idle