Setting Up - Netware - Axis 570 User Manual

AXIS 570/670 User's Manual
Section 6 Setting Up - NetWare
If you have performed the basic installations as described in Basic
Setup with AXIS NetPilot, on page 32, the AXIS 570/670 is now ready
for printing within the NetWare environment.
However, if you need a more advanced installation that is not covered
by the AXIS NetPilot Installation Wizard, you are advised to perform
the additional instructions presented in Advanced Installation using
AXIS NetPilot, on page 118.
If you want to install the AXIS 570/670 using NDPS, you should not
use the AXIS NetPilot Installation Wizard at all. You should instead
follow the instructions in Setup using NDPS, on page 116.
If you intend to operate your AXIS 570/670 in a multiprotocol
environment, you should also proceed to the other relevant sections in
this manual, namely:
Section 4 Setting Up - AS/400, on page 49
Section 5 Setting Up - IBM Mainframe, on page 87
Section 7 Setting Up - Windows, on page 123
Section 8 Setting Up - OS/2, on page 145
Section 9 Setting Up - Macintosh, on page 149
Section 10 Setting Up - UNIX, on page 155
Section 6: Setting Up - NetWare
115