Assigning An Ip Address - Axis 570 User Manual

Section 3: Basic Installation
36

Assigning an IP address

Before you start
System privileges
Ethernet address
Node address
IP address
Important:
To establish communication with the TCP/IP network, enabling
TCP/IP printing and Web browser management, an IP address must
be assigned to your AXIS 570/670.
You need root privileges on your UNIX system, or administrator
privileges on a Windows NT server.
You need to know the Ethernet address of your AXIS 570/570e to
perform the installation. The Ethernet address is based upon the serial
number of your AXIS 570/570e. This means, for example, that an
AXIS 570/570e with the serial number of 00408C100086, will have
the corresponding Ethernet address of 00 40 8C 10 00 86. The serial
number is located on the bottom label of the unit.
In Token Ring networks the node address is either the serial number
found on the underside label of the AXIS 670/670e or a Locally
Administrated Address
Unless you are downloading the IP address using DHCP, you must
obtain an unused IP address from your network administrator.
DO NOT use the IP addresses used in the following examples
when installing your AXIS 570/670. Always consult your network
administrator before assigning an IP address to your AXIS
570/670.
AXIS 570/670 User's Manual