Setup For Windows 95/98 & Nt; Tcp/Ip Printing Using Axis Print System; Windows - Axis 540+ User Manual

Setup for Windows 95/98 & NT AXIS 540/640 User's Guide
14
Setup for Windows 95/98 & NT

TCP/IP Printing using AXIS Print System

AXIS Print System is the preferred utility for installing TCP/IP printer ports in
Windows 95, Windows 98 and Windows NT 4.0 environments. It allows you to
locate and install network printers. If you choose Custom Installation while installing
the AXIS Print System, you will be able to set the IP address of the AXIS 540/640
using the comprised AXIS IP Installer.
For peer-to-peer printing, AXIS Print System must be installed on all printing clients,
while it is only necessary to install it on the server for client-server printing.
Install the AXIS Print System software, if you have not already done so. It is supplied
on the AXIS Online CD. It can also be downloaded from the Axis WWW home page
at http://www.axis.com/. Once installed, the AXIS Print System is automatically
initialized on system start-up.
To install a printer with the AXIS Print System, use the Installation Wizard that is
available from the AXIS Print System user interface. If you need help, please see the
AXIS Print System's built-in Help system or refer to the User's Manual.
Note:
For TCP/IP printing in Windows NT 3.5x environments, you should use AXIS Print Monitor.