Store Independent Transmit Frequencies; Recall A Stored Memory - Yaesu FT-8800R Operating Manual

Store Independent Transmit Frequencies

To store independent transmit frequencies (odd splits) in a memory channel:
1. Store the receiving frequency using the instructions described in
in Memory
2. Turn to the desired transmit frequency on the
key for ½ second.
SET
3. Within ten seconds of pressing the
microphone's
used in step 1 above.
4. Press and hold in the
holding the
cause transmission; instead, it signals the microprocessor that a separate transmit
frequency is being programmed into that memory register.)
Whenever you recall a memory which contains independently-stored
transmit and receive frequencies, the
displayed.

Recall a Stored Memory

To recall (activate) a stored memory channel:
1. If operating in the
mode.
2. Rotate the
When the radio is already set to the Memory mode, an easy way to recall
memories is enter the three-digit memory channel number from the
MH−48A6J microphone' s keypad. For example, to recall memory channel
#4, press 0
Yaesu FT-8800R Operating Manual (courtesy of W5JCK)
on page 36.
and buttons to select the same memory channel number as
switch, then press the
PTT
switch to save the entry and exit to normal operation. (This will not
PTT
mode, press the
VFO
knob to select the desired channel.
DIAL
0 4.
band, then press and hold in the
Main
key, use the
SET
key momentarily while
SET
(odd split) indicator will be
key momentarily to enter the
0.
REGULAR MEMORY
Store a Frequency
knob or
DIAL
0.
Memory
Page 38 of 83