Menu B 33 Rpt.mod; Menu #34 Scan; Menu B 35 Scan M - Yaesu FT-8800R Operating Manual

Menu b 33 RPT.MOD

Function: Sets the Repeater Shift Direction.
Values: RPT.OFF, RPT. –, RPT. +
Default: RPT.OFF (simplex)
The value for this Menu Item is to be applied separately to each Operating
Band / Mode.

Menu #34 SCAN

Function: Selects the Scan-Resume mode.
See Set the Scan-Resume Preference
Values: TIME, BUSY
TIME
BUSY
Default: BUSY
This Menu Item can be set independently for each band.

Menu b 35 SCAN M

Function: Selects the Memory Scan mode.
See Scan in Memory Mode on page 49 for details.
Values: MEM, MSM
MEM
MSM
Default: MEM
The value for this Menu Item is to be applied separately to each Operating
Band / Mode.
Yaesu FT-8800R Operating Manual (courtesy of W5JCK)
Scanning will halt on a signal it encounters, and will hold five seconds. If
you do not take action to disable the scanning within five seconds, scanning
will resume even if the stations are still active.
Scanning will halt on a signal it encounters. Two seconds after the carrier
has dropped because the other station(s) ceased transmission, scanning
will resume.
Enables Memory Scanning on all memory channels.
Enables Memory Scanning on flagged Memory Channels only.
on page 46
for details.
MENU (SET) MODE
Page 79 of 83