Menu H 4 Band; Menu #5 Beep; Menu B 6 Clk.sft - Yaesu FT-8800R Operating Manual

Menu h 4 BAND

Function: Enables/disables the VFO Band edge for the current band.
Values: BND. ON, BND.OFF
BND.
ON
BND.OFF When the VFO frequency reaches the high edge of the current band, the
Default: BND. ON
The value for this Menu Item is to be applied separately to each Hyper
Memory Channel.

Menu #5 BEEP

Function: Enables/disables the beeper.
See Activate the Key/Button Beeper on page 21 for details.
Values: BEP.ON, BEP.OFF
Default: BEP.ON

Menu b 6 CLK.SFT

Function: Shifts the CPU clock frequency.
Values: SFT. ON, SFT.OFF
Default: SFT.OFF
1. This function is only used to move a spurious response birdie, should it
fall on a desired frequency.
2. The value for this Menu Item is to be applied separately to each
Operating Band / Mode.
Yaesu FT-8800R Operating Manual (courtesy of W5JCK)
When the VFO frequency reaches the high band edge of the current band,
the VFO frequency will jump to the low band edge of the current band (or
vice versa).
VFO frequency will jump to the low band edge of the next band (or vice
versa).
MENU (SET) MODE
Page 71 of 83