Internet Connection Feature - Yaesu FT-8800R Operating Manual

Internet Connection Feature

The can be used to access a repeater which has been configured to provide access
FT−8800R
to the Vertex Standard
other
Internet Link Systems
To access a WIRES™ repeater:
1. Press the left
message will be displayed for 2 seconds at the
INT ON
appear in the memory channel field on the
enabled.
2. Rotate the
the access number (
corresponding to the
link. Ask the repeater owner/operator if you don't know the access numbers in the
network.
3. With the
WIRES
second)
DTMF
the beginning of every transmission to establish or maintain the link to the remote
repeater.
WIRES™
4. To disable the
To access other Internet Link Systems that use a DTMF string for
access:
1. Press the
2. Rotate the
3. Press the
use to establish an Internet link (ask your repeater owner/operator if you don't know
the access numbers in the network) into the desired
a. Rotate the
number (
b. Press the
c. Rotate the
knob momentarily to move the digit.
d. Repeat step c.
e. Press the
Yaesu FT-8800R Operating Manual (courtesy of W5JCK)
(Wide-Coverage Internet Repeater Enhancement System) or
WIRES™
that use a
DTMF
knob momentarily to activate the
VOL
knob, while pressing and holding in the left
DIAL
through
ICOD 0
repeater to which you wish to establish an Internet
WIRES™
capability activated, the
tone according to your selection in step 2. This
access capability, press the left
WIRES™
momentarily to enter the
SET key
knob to select
DIAL
knob momentarily, then load the
DIAL
knob to select the
DIAL
through
d-1 d-16
knob momentarily.
DIAL
knob to select the
DIAL
knob momentarily to save the new setting.
DIAL
INTERNET CONNECTION FEATURE
string for access.
WIRES™
Main
band while
Sub
, through
ICOD 9 ICOD A
will generate a brief (0.1
FT−8800R
VOL
mode.
Set
.
Menu #15 DTMF W
DTMF
DTMF Memory
DTMF Autodialer
).
code, then press the
DTMF
access capability. The
band. The icon will
int
access is
WIRES™
knob, to select
VOL
)
ICOD F
tone is sent at
DTMF
knob again. 0.
tones which you wish to
channel.
memory channel
DIAL
.
Page 61 of 83