Menu #11 Dcs.n/R; Menu H 12 Dsp.sub; Menu #13 Dtmf D; Menu #14 Dtmf S - Yaesu FT-8800R Operating Manual

Menu #11 DCS.N/R

Function: Selects Normal or Inverted DCS coding.
See DCS Code Inversion on page 34 for details.
Values: TRX N, RX R, TX R, TRX R
Default: TRX N

Menu h 12 DSP.SUB

Function: Selects the Sub Band display format.
Values: FREQ, CWID, DC-IN, OFF
FREQ
CWID
DC-IN
OFF
Default: FREQ
1. When this Menu Item is set to any selection other than the FREQ the
Sub band receiver will be disabled.
2. The value for this Menu Item is to be applied separately to each Hyper
Memory Channel.

Menu #13 DTMF D

Function: Sets the DTMF Autodialer Delay Time.
See Operating the DTMF Autodialer on page 59 for details.
Values: 50MS, 250MS, 450MS, 750MS, 1000MS
Default: 450MS

Menu #14 DTMF S

Function: Sets the DTMF Autodialer Sending Speed.
See Operating the DTMF Autodialer on page 59 for details.
Values: 50MS (high speed), 75MS (mid speed), 100MS (low speed)
Default: 50MS
Yaesu FT-8800R Operating Manual (courtesy of W5JCK)
Displays the Sub band frequency (Dual band operation).
Displays the CW ID.
Displays the DC supply voltage.
No Display.
MENU (SET) MODE
Page 73 of 83