Yaesu FT-8800R Operating Manual page 9

Key: (Default)
• Press this key momentarily to switch the frequency control for the adjoining band
between the
• When the adjoining band is set to the
to activate the Smart Search Feature.
• When the adjoining band is set to the
second to activate the Memory Bank feature.
Key: (Default)
• Press this key momentarily to recall a favorite
• Press and hold in this for ½ second to activate
adjoining band.
Key: (Default)
• Press this key momentarily to activate the
• When the adjoining band is set to the
second to shift to the Memory Tuning feature on the adjoining band.
Right Side Keys when in
e
To s t the right side keys to Key Mode 2:
1. Press the
2. Rotate the
3. Press the
setting to
KEY 2
4. Press and hold in the
to normal operation.
When set to Key Mode 2, the
MHz Key:
• Press this key momentarily to allow tuning in 1-MHz steps on the
• Press and hold in this key for ½ second to allow tuning in 10-MHz steps on the
band .
VFO
Yaesu FT-8800R Operating Manual (courtesy of W5JCK)
and Memory Systems.
VFO
Key Mode 2 (
key momentarily to enter the Set mode.
SET
knob to select
DIAL
knob momentarily, then rotate the
DIAL
.
DIAL
indicator is displayed and the keys function as follows:
while in Key Mode 2
mode, press and hold in this for ½ second
VFO
mode, press and hold in this key for ½
Memory
Home Channel
Priority Channel Scanning
on the adjoining band.
Scanner
mode, press and hold in this key for ½
Memory
)
Menu #20 KEY.MOD
knob for ½ second to save the new setting and exit
INTRODUCTION
on the adjoining band.
on the
.
knob to change the
DIAL
band
Main
Page 9 of 83
.
VFO
Main