Change The Frequency Band - Yaesu FT-8800R Operating Manual

Change the Frequency Band

In the factory default configuration, the
The following illustration shows UHF–VHF (
The can also be configured to operate in
FT−8800R
modes (shown below).
V-V mode
To switch the frequency band:
When in
•
VFO
operating band on the left side to the next-highest frequency band.
144 MHz
When in
•
VFO
operating band on the right side to the next-highest frequency band.
430 MHz
To switch the
Main
Yaesu FT-8800R Operating Manual (courtesy of W5JCK)
FT−8800R
mode, press and hold in the left
250 MHz 350 MHz
mode, press and hold in the right
850 MHz 144 MHz
band, see
Select the Main Operating Band
operates in the
Dual Receive
) mode of operation.
U-V
mode (not shown), or
V-U
knob for ½ second to cycle the
DIAL
430 MHz 850 MHz
knob for ½ second to cycle the
DIAL
250 MHz 350 MHz
on page 17 for details.
COMMON TASKS
mode.
or
V-V U-U
U-U mode
Page 18 of 83