Preferential Memory Scan - Yaesu FT-8800R Operating Manual

Preferential Memory Scan

During
Preferential Memory Scan
strong enough to open the squelch; scanning will then resume according to the
mode that was selected. See
To place a Memory channel on the Preferential Scan List:
1. Set the radio to the
2. Rotate the
.
Scan List
3. Set the band for the selected
knob.
4. Press the
5. Rotate the
6. Press the
7. Press and hold in the
normal operation.
To configure the FT−8800R
This setting is stored separately for each side of each Hyper Memory
channel (see page 43).
1. Press the
2. Rotate the
3. Press the
DIAL
4. Press and hold in the
normal operation.
Now only the channels which have the
Yaesu FT-8800R Operating Manual (courtesy of W5JCK)
, scanning will pause on any signal encountered that is
Set the Scan-Resume Preference
mode by pressing the
Memory
knob to select the channel which you wish to add to the
DIAL
Memory Channel
momentarily to enter the
SET key
knob to select
DIAL
knob momentarily, then rotate the
DIAL
DIAL
0.
for
momentarily to enter the
SET key
knob to select
DIAL Menu #35 SCAN M
knob momentarily, then rotate the
knob for ½ second to save the new setting and exit to
DIAL
0.
to the
Main
mode.
Set
Menu #37 SKP.MSM
knob for ½ second to save the new setting and exit to
Preferential Memory Scan:
mode.
Set
.
DIAL
icon displayed will be scanned.
Scan-Resume
on page 46 for details.
key, if necessary.
Preferential
band by pressing the
.
knob to
DIAL
MSM
knob to .
MSM
Page 53 of 83
SCANNING
DIAL
.