Menu B 36 Shift; Menu B 37 Skp.msm; Menu B 38 Step - Yaesu FT-8800R Operating Manual

Menu b 36 SHIFT

Function: Sets the magnitude of the Repeater Shift.
Values: 0.00 – 99.95 MHz (50 kHz step)
Default: Depends on the band of operation.
The value for this Menu Item is to be applied separately to each Operating
Band / Mode.

Menu b 37 SKP.MSM

Function: Selects what action will happen on a flagged Memory Channel.
See Scan in Memory Mode on page 49 for details.
Values: OFF, SKIP, MSM
OFF
SKIP
MSM
Default: OFF
The value for this Menu Item is to be applied separately to each Operating
Band / Mode.

Menu b 38 STEP

Function: Sets the Synthesizer steps.
See Select the Channel Step on page 22 for details.
Values: 5.0k, 10.0k, 12.5k, 15.0k, 20.0k, 25.0k, 50.0k
Default: Depends on the band of operation.
The value for this Menu Item is to be applied separately to each Operating
Band / Mode.
Yaesu FT-8800R Operating Manual (courtesy of W5JCK)
All memory channels will be scanned (the flag will be ignored).
The scanner will skip the flagged (Skip) channels during scanning.
The scanner will only scan the flagged (Preferential) channels during
scanning.
MENU (SET) MODE
Page 80 of 83