Mh−48A6J Microphone Overview - Yaesu FT-8800R Operating Manual

MH−48A6J Microphone Overview
The A, B, C, and D keys serve no function on the FT−8800R.
(3) Programmable Buttons
You can program any of the Programmable buttons for the following functions:
, , , ,
LOW MHz PRI REV
(See
Program the Microphone Buttons
button: default setting is BAND function
• Press this button to switch the
LCD screen. This is the best and easiest way to set the
prefer.
• Press and hold this button for ½ second to move operation to the next-highest
frequency band on the
button: default setting is VFO/MR function
• Press this button momentarily to switch the frequency control for the
between the
Yaesu FT-8800R Operating Manual (courtesy of W5JCK)
(1) PTT Switch
Press this switch to transmit, and release it to receive.
(2) Keypad
The 12 number keys generate DTMF tones during
transmission.
In the receive mode, these keys can be used for direct
frequency entry and/or direct numeric recall of the Memory
channels.
, ,
RPTR SCAN SQL.OFF
on page 14 for details.)
Main
band.
Main
and Memory Systems.
VFO
, , ,
TCALL TONE VFO/MR
band between the Left and Right displays on the
INTRODUCTION
BAND
.
band to the side you
Main
band
Main
Page 12 of 83
, ,
HOME