6. Repeat step 5 to modify the remaining letters, numbers, or symbols of the desired
.
Name Tag
7. When you have completed the modification of the
momentarily to save the tag and exit to normal
SET key
To delete/hide an Alpha-numeric Name Tag for a memory:
The only way to manually delete a
then re-enter it without the tag.
Store Independent Transmit Frequencies
To store independent transmit frequencies (odd splits) in a memory channel:
1. Store the receiving frequency using the instructions described in
on page 32.
Memory
2. Turn to the desired transmit frequency on the
for ½ second.
SET key
3. Within ten seconds of pressing the
microphone's
used in step 1 above.
4. Press and hold in the
holding the
cause transmission; instead, it signals the microprocessor that a separate transmit
frequency is being programmed into that memory
Whenever you recall a memory which contains independently-stored
transmit and receive frequencies, the
displayed.
Yaesu FT-8900R Operating Manual Expanded Edition (courtesy of W5JCK)
Name Tag
and
buttons to select the same memory channel number as
switch, then press the
PTT
switch to save the entry and exit to normal operation. (This will not
PTT
Name Tag
operation.0.
from a
channel is to delete the channel
Memory
band, then press and hold in the
Main
key, use the
SET
SET key
register.)0.
(odd split) indicator will be
REGULAR MEMORY
, press and hold in the
Store a Frequency in
knob or
DIAL
momentarily while
Page 34 of 77