Set A Home Channel; Use Memory Banks - Yaesu FT-8800R Operating Manual

Set a HOME Channel

A special one-touch
allow quick recall of a favorite operating frequency on each band.
To store a channel:
HOME
1. Select the desired frequency while operating in the
sure to set up any desired
The power level may also be set at this time.
2. Press and hold in the
(blinking) on the display.
3. While the memory channel number is blinking, press the
frequency and other data will now be stored in the special
4. You may repeat this process on the other operating bands.
5. To recall the
or
VFO Memory

Use Memory Banks

To assign a Memory channel to a Memory Bank:
1. Recall the
Memory Bank
2. Press and hold in the
the
Memory Bank
channel.
Yaesu FT-8800R Operating Manual (courtesy of W5JCK)
channel is available (one for each of the five operating bands), to
HOME
CTCSS
key for ½ second. A memory number will appear
SET
channel, just press the
HOME
mode. 0.
channel (except
Memory
.
key for ½ second, then rotate the
( through
BANK1
VFO
or tones, as well as any desired repeater offset.
DCS
key while operating either in the
through
L1/U1 L10/U10
) you want as the
BANK10
REGULAR MEMORY
mode on the band. Be
Main
key. The
channel register.
HOME
) to be assigned to a
knob to select
DIAL
for this
Memory Bank
Page 40 of 83