Upgrade Firmware From The Printer Home - Intermec PC23 User Manual

Upgrade Firmware from the Printer Home Page
Thomas said the
best way to see
what happens is to
try this. I have not
had time to do so.
PC23 and PC43 Desktop Printer User Manual
5 Remove the USB storage device and restart the printer. After the
printer finishes starting up, the upgrade is complete.
For the LCD printer, the Startup Wizard appears when the upgrade
is complete.
To configure the printer from its home page, the printer must be
turned on and connected to your WiFi or Ethernet network.
1 On your desktop PC, start a web browser.
2 In the address field, type the printer IP address and press Enter.
The printer home page appears.
3 Click login in the upper right corner of the screen. The Login page
appears.
4 Type your Username and Password in the entry fields and click
Login.
5 Click the Services tab > Firmware Upgrade. The Firmware
upgrade screen appears, showing the current firmware version.
6 Click Browse to locate the upgrade file and double-click the file.
7 Click Upgrade. The firmware file is uploaded to the printer.
8 <WHAT HAPPENS NEXT?>
Chapter 6 —
121