Configuring Wireless Printing Using Ipl - Intermec PB21 User Manual

Chapter 2 — Configuring the PB21/PB31
32
Understanding the 802.11 Radio Icons
Icon Description
Excellent signal
Strong signal
Good signal
Weak signal
Poor signal
No signal
Use the following sections to set most of your wireless
communication settings. For help with additional commands and
information, see either the
Manual or the IPL Developer's
documents from the Intermec web site at www.intermec.com.

Configuring Wireless Printing Using IPL

Use the following procedures to configure your PB21/PB31 with IPL
for wireless printing.
To configure the printer to use WEP authentication
1 Send the following commands to login as an admin and set the
SSID:
<STX><ESC>.x,su -p pass admin<ETX>
<STX><SI>ws,SSID,xxxxx<ETX>
where xxxxx can be from 0 to 32 alphanumeric characters.
Note: The default password for logging in as an admin is "pass."
If you have changed the password, you will need to use your
password instead of "pass."
Fingerprint Programmer's Reference
Guide. You can download both
PB21/PB31 Mobile Receipt Printer User's Guide