Understanding The Printer Modes; Understanding Ready Mode; Understanding Pause Mode; Understanding Error Mode - Intermec PW50 User Manual

Understanding the Printer Modes

Understanding Ready Mode

Understanding Pause Mode

Understanding Error Mode

PW50 Workboard Printer User Guide
3 Print a testprint to verify that your firmware was upgraded
correctly. For help, see
4 Cold boot the PW50. For help, see
page 31.
The PW50 has five modes to help you effectively interact with the
printer: Ready, Pause, Error, Test, and Upgrade. Use the following
sections to understand the different printer modes.
The printer is in Ready mode when the printer is on and ready to
print.
Use Pause mode to momentarily stop printing or to cancel a current
print job. Use the Feed button to both pause and resume printing.
To enter Pause mode
• Press the Feed button while the printer is printing.
To resume printing
• Press the Feed button while the printer is paused.
To cancel a print job
1 Press the Feed button to pause printing.
2 Press and hold the Feed button to cancel the print job.
The printer enters Error mode when it detects an error condition such
as a low battery or a paper fault. When the printer is in Error mode,
the status LED blinks red.
Chapter 2 — Configuring the PW50
"Printing a Testprint" on page
"Cold Booting the PW50" on
12.
23