Testing The Treadmill Operation - CYBEX 770T-CT Owner's Manual

Cardiovascular systems
Hide thumbs Also See for 770T-CT:
Table of Contents

Advertisement

The Setup options are:
Time and Date
Units and Power
Workout times
Limits
Language
Exit Set Up Mode.
1.
Exit Set Up Mode by
will refresh.
Your treadmill is now ready for use. Proceed to Testing the Treadmill Operation. Follow the
instructions in the Operation chapter to learn how to operate the treadmill. You should begin with
walking speeds first, to be sure everything is functioning properly.
WARNING: Be sure that all electrical requirements are met as indicated in the
specifications at the front of the manual and at the beginning of this chapter
prior to proceeding.

Testing the Treadmill Operation

Use the following instructions to test the full speed and incline range of the treadmill and to check the
belt for proper operation.
CAUTION: During this procedure STAY OFF THE RUNNING BELT! Stand with your feet on
the two steps.
Cybex recommends that the treadmill be unplugged or the on/off (I/O) power switch turned off (O)
when it is not in use.
1.
Without anyone on the treadmill, plug the power cord into a power outlet from a grounded,
dedicated circuit as described under Electrical Requirements in this chapter.
Ensure the power cord is not being pinched under the front of the treadmill.
2.
Locate the on/off (I/O) power switch under the front end of the treadmill. Toggle it to the on
position (I).
3.
The control panel will light up and be in the opening screen.
4.
Press the
Quick Start key. The treadmill begins a countdown "3...2...1" and sounds a tone
for each count. After it reaches one (1), the treadmill gives a longer tone and then begins
accelerating the belt to reach 0.5 mph (0.8 kph).
5.
The lower left display will show the incline and the lower right display will show the actual
speed.
Cybex 770T-CT Treadmill Owner's Manual
See Initial setup above
See Initial setup above
Set Default and Max time
Set minimum speed, maximum speed and maximum
incline
Select language to use for CardioTouch text
tapping the Toolbox
icon
, then tap the Home icon
35
. The screen

Advertisement

Table of Contents
loading

Table of Contents