Table of Contents
Advertisement
When you adjust incline in a program, the change will affect only the current segment. The program
control will resume starting with the next segment. To increase or decrease overall intensity, adjust
the speed and/or the program level.
10.
Press the
Speed + – keys to change the belt speed at any time. The right display will show the
set speed.
Incline ▲▼ keys to change the incline at any time. The left display will show the
11.
Press the
current incline only when incline keys are used, then revert to time.
12.
Press the
Stop key at any time to stop the workout. "Workout Review" is displayed and the
incline returns to 0%.
13.
If the e-stop key is removed during a workout, the drive motor power shuts off immediately,
causing the belt to stop. "Emergency Stop – Key" is displayed. Replacement of the e-stop key
causes Workout Review to begin.
14.
When a program is complete the treadmill begins a countdown,
for each count. The belt slows to a stop, the incline returns to 0% and Workout Review is
displayed for the preset time or until you press the Home key.
15.
The treadmill returns to
Stopping the Treadmill
Press Stop once to end the workout session and start the Workout Review. The treadmill will perform
a controlled belt stop and bring the incline to 0%. The Text Area will be displaying accumulated data
or the results of the Fitness Test for the duration configured in Setup for Review Time. Press Stop
again to exit to Dormant.
The function of the immobilization method: The purpose of immobilizing the treadmill is to prevent
unauthorized use. This can be accomplished by removing the e-stop key from the treadmill, un-
clipping it from the cord and putting it in a non-accessible place. Immobilization can also be enabled
using the LOCK code. Either temporarily by pressing LOCK during review and entering the correct
PIN number, or permanently by enabling the LOCK feature in SETUP mode. See Setup in Chapter 2.
1
Cybex 770T-CT Treadmill Owner's Manual
LEVEL
4
SPEED
WEIGHT
7
CLEAR
Dormant Mode.
2
3
FAN LO
5
6
FAN OFF
8
9
ALT
ENTER
0
46
"3...2...1" and sounds a tone
Advertisement
Table of Contents
