Table of Contents
Advertisement
6.
Place the console assembly in position on the bolts installed in step 3 in the left and right
uprights.
7.
Hand thread six bolts, into the remaining holes of the right upright and left upright.
8.
Using the 7/32" Allen wrench, fully tighten all of the bolts.
Connect the Display Cable.
The display cable and CSAFE cable have the same connectors. The display cable is black, the
CSAFE cable is red.
Route the cables under all other cables and towards the base plate.
Cybex 770T-CT Treadmill Owner's Manual
Console
Upright
(Right side shown)
Display Cable
Enters Here
Hole
Bolt
28
Advertisement
Table of Contents
