Detailed Operation Guide
Maximum user weight is 400 lbs. (181 kg).
1.
Plug the treadmill power cord into a power outlet from a grounded, single phase, dedicated
circuit, rated for one of the following:
100 VAC, 50/60 Hz, 20A
•
115 VAC, 60 Hz, 20A
•
208 VAC, 60 Hz, 15A
•
220 VAC, 60 Hz, 15A
•
230 VAC, 50 Hz, 13A, UK
•
240 VAC, 50 Hz, 15A
•
2.
Set the on/off switch to the on position.
WARNING: Do not stand on the running belt when starting the treadmill. Always place
your feet on the two top steps when beginning a workout.
3.
Place your feet on the two top steps located on each side of the running belt.
4.
Clip the e-stop clip onto your clothing and carefully test the e-stop key to ensure it will activate
in case of an emergency. See Emergency Stop Key (e-stop) in Chapter 1 for properly testing
the e-stop key. Also, see Stopping the Treadmill in this chapter for further information about the
e-stop key. Be sure the string is free of knots and has enough slack for you to run comfortably
with the e-stop key in place.
5.
At the opening screen select Manual, Quick Start or Programs.
If Manual Mode is selected, choose a Time, Distance or Calorie Goal. Enter goal value by tapping
the keypad and then the Enter icon. The range of values are displayed on the Scale.
To select a program category, tap one of the program category icons from the program options screen.
Cybex 770T-CT Treadmill Owner's Manual
44