Table of Contents
Advertisement
Install the uprights.
1.
Locate two standoffs short and long.
2.
Using a 3/4" open end wrench, secure the standoffs short and long to the right side of the
base.
3.
Locate the right upright and two bolts.
4.
Hand thread two bolts into the base. Do not fully thread bolts into the base.
5.
Carefully place the right upright onto the base assembly and the bolts installed in the previous
step.
6.
Hand thread four bolts into the right upright.
Cybex 770T-CT Treadmill Owner's Manual
Short
Long
Upright
Base
Front of Unit
Base
Bolt
26
Advertisement
Table of Contents
