Table of Contents
Advertisement
6.
Press and hold down the
mph (6.4 kph), as indicated on the display.
7.
Observe the belt to see that it is running properly; it should stay centered in the middle of the
deck. If you have problems with the running belt operation, see Running Belt Adjustments in
the Preventive Maintenance chapter.
Run the treadmill through its full speed range. First press the
8.
reaches its highest speed. Then press the Speed - key until the treadmill is back to 0.5 mph
(0.8 kph).
As you press the Incline ▲▼ or
9.
incline or speed.
10.
When the treadmill reaches the set incline and speed, the displays will remain steadily
illuminated to indicate that the desired settings have been reached.
11.
Run the treadmill through its full % grade range. Press the
reaches its highest grade (15%). Then press the Incline ▼ key until the treadmill reaches 0%
grade.
12.
Press the
Stop key once to stop the running belt and enter Review Mode. Press the Stop key
again to exit Review Mode and return the display to the opening screen.
Cybex 770T-CT Treadmill Owner's Manual
Speed + key until the treadmill reaches a speed of approximately 4
Speed + - keys, the respective displays will show the actual
Speed + key until the treadmill
Incline ▲ key until the treadmill
36
Advertisement
Table of Contents
