Table of Contents
Advertisement
7.
Repeat steps for the left upright.
Install the console assembly to the uprights.
1.
Locate the console assembly and two bolts.
If unit includes optional A/V or CSAFE cables, follow same display cable procedure.
2.
3.
Hand thread one bolt, into the top back hole for each side of the console assembly. Do not fully
thread bolts into the console assembly.
4.
Locate the display cable exiting the bottom right of the console assembly.
Do not pinch or damage display cable when installing console assembly.
Two people are required for the following two steps.
5.
Insert the display cable into the top of the right upright until it exits the hole at the base of the
right upright.
Cybex 770T-CT Treadmill Owner's Manual
Upright
Bolt
Console
Upright
(Right side shown)
Bolt
Bolt
Display
Cable
Front of Unit
27
Advertisement
Table of Contents
