CYBEX 770T-CT Owner's Manual page 31

Insert the CSAFE coupler into the mounting plate by hooking the lower tab into the mounting
7.
plate and snapping in the upper tab.
Plug the CSAFE cable into the CSAFE coupler on the front of the unit.
8.
Install shield.
1. Using a Philips screwdriver install the seven screws securing the shield to the base.
Attach the front covers.
Perform steps 1 and 2 if you removed the front cover. If not, skip to step 3.
1. Locate the front cover and four screws removed on page 24.
2. Using a Philips screwdriver install, but do not fully tighten the four screws securing the front
cover to the base.
Cybex 770T-CT Treadmill Owner's Manual
Upper Tab
Mounting
Plate
Installed
Screws
(7)
Front Cover
CSAFE
Coupler
Lower Tab
Shield
Screws (4)
31