Table of Contents
Advertisement
6.
Route the power cord through the hole in the upright support and behind the lower cover.
7.
Adjust the power cord length entering the frame to allow for the power cord to be plugged into
the power cord inlet. Do not plug the power cord in at this time.
8.
Adjust the power cord length exiting the rear of the frame. Store extra power cord behind lower
cover.
9.
Install the right top step by placing in position and inserting a long 3/8" drive socket extension
into the right top step.
3/8" Drive Socket Extension
10.
Pry the long 3/8" drive socket extension forwards to secure the right top step.
11.
Using a Phillips screwdriver, install the two screws securing the right end cap.
Cybex 770T-CT Treadmill Owner's Manual
Lower Cover
Hole in Upright
Support
Right Top Step
25
Power
Cord Inlet
Power Cord
Advertisement
Table of Contents
