Safety Sentry; Control During Operation - CYBEX 770T-CT Owner's Manual

Cardiovascular systems
Hide thumbs Also See for 770T-CT:
Table of Contents

Advertisement

The emergency dismount: Follow the steps listed below if you experience pain, feel faint or need to
stop your treadmill in an emergency situation:
1.
Grip handrails for support.
2.
Step onto the top steps.
3.
Pull the e-stop key off the console.
The function of the emergency stop: The e-stop key functions as the emergency stop. In an
emergency situation, remove the e-stop key from the treadmill and the running belt will come to a
stop.

Safety Sentry

If you step off of your treadmill during a workout, it is designed to detect your absence and will stop
the belt. Before taking action, the display will beep twice and display "Touch the screen to continue"
on the text area. If no response in 20 seconds, it will proceed to exiting Active Mode and then Review.
The treadmill will use every sensor available to determine a user is still on the belt before asking if
you are present, then shutting it off. If the user is lighter than 100 lbs. (45 Kg), the motor drive may
not be able to determine they are on the belt. In this instance, the treadmill can only rely on the
motion sensor, key inputs, or the heart rate to establish your presence. It is advisable for lighter users
to stay within the 'sight' of the motion sensor (no further back than the end of the handrails) or take
advantage of the wireless heart rate feature to avoid triggering the Safety Sentry.

Control During Operation

Control keys are usable during operation and may be pressed at any time to make adjustments in
speed, elevation or data readouts. The Speed and Incline keys are located near the hand grips,
allowing for thumb adjustments without removing your hands from the hand grips.
Changing Speed — Press the Speed + – keys to change the speed in increments of 0.1 mph or 0.1
kph. Minimum to maximum speed is from 0.5 - 12.4 mph (0.8 - 20.0 kph).
Changing Incline — Press the Incline
Elevation ranges from 0 to 15%. Press multiple times to change incline setting. Elevation is defined
as the ratio of rise or fall over run of the treadmill deck.
Cybex 770T-CT Treadmill Owner's Manual
keys to change the elevation in increments of 1%.
47

Advertisement

Table of Contents
loading

Table of Contents