Troubleshooting; Possible Printer Problems And Their Solutions - Kodak 3000 series User Manual

Troubleshooting

POSSIBLE PRINTER PROBLEMS AND THEIR SOLUTIONS

This chapter describes the problems you may occasionally have with your printer and
how to resolve them.
1. After turning the power switch ON, the printer does not start.
Possible Cause
Is the power cable
connected?
Are you using the correct
voltage?
Is the printer's cover open or
is the hold lever UP?
Broken fuse
2. After loading the media, the media loading sequence does not start.
Possible Cause
Is the printer's cover open or
is the hold lever in the UP
position?
Is the media loaded straight?
Are the ink cassettes
installed?
3. The printer does not start after sending data from your computer
Possible Cause
Is the interface cable
connected?
Are the ink cassettes
installed?
Is there still ink in the
cassettes?
TROUBLESHOOTING
Solution
Connect the power cable.
Use the correct voltage.
Close the printer cover. Put
the hold lever in the DOWN
position.
Solution
Close the printer cover. Put
the hold lever in the DOWN
position.
Load the media straight.
Install the ink cassettes.
Solution
Refer to "Connecting the
Interface Cable".
Install the ink cassettes.
Replace the ink cassettes.
KODAK PROFESSIONAL Large
Format 3000 Series Inkjet Printers
Reference
Installing the Printer
Installing the Printer
Installing the Printer
Reference
Installing the Printer
Setting Up the Printer
Setting Up the Printer
Reference
Setting Up the Printer
Setting Up the Printer
Maintaining the
Printer
65