Kodak 3000 series User Manual page 34

Setting up the Printer
NOTE:
Unpack the ink cassettes just before installing them in the
printer.
After the ink cassettes are installed, do not remove them until
you replace them.
The ink cassettes must be used within two years from the date
printed on the cassette. Ink cassettes installed in the printer
should be replaced in six months.
Moving ink cassettes from a cold place to a warm place may
cause condensation. Always leave the cassettes at room
temperature for at least three hours before installing them in the
printer.
If the head is stopped during a print cycle, it may leak. Do not
turn the power off or unplug the power cable during printing or
while the printing head is moving.
If a power failure occurs during printing, turn OFF the printer
and manually move the head to the right until it drops into the
capping position.
If a power failure occurs when you are absent, the printer will
move the head to the capping position when power is
restored; and a cleaning cycle will take place automatically.
KODAK PROFESSIONAL Large
Format 3000 Series Inkjet Printers
29