Kodak 3000 series User Manual page 46

Large format inkjet printers

Hide thumbs Also See for 3000 series:

Table of Contents

Setting up the Printer

IMPORTANT:

If the roll media has not been fed straight or incorrectly, messages

such as, "media error" or "media jam error" are shown on the

control panel. If necessary, reload the media following the

instructions above.

Checking that the Media is Parallel

1. During the media detection sequence, make sure that the roll media is parallel. After

media detection, check the position of the right side of the roll media. If the roll

media position now is:

almost on the same line as it was before closing the cover, media loading was

performed successfully. Go to Step 1 "Making a Test Print".

not on the same position as it was before closing the cover, go to Step 1,

"Adjusting the Roll Media Position".

Adjusting the Roll Media Position

1. From the front of the printer turn the

scroller receiver screw counterclockwise

to move the roll media to the right

2. From the front of the printer, turn the

scroller receiver screw clockwise to

move the roll media to the left

KODAK PROFESSIONAL Large

Format 3000 Series Inkjet Printers

Table of Contents

Professional 3000 series