Kodak 3000 series User Manual page 47

Large format inkjet printers

Hide thumbs Also See for 3000 series:

Table of Contents

Setting up the Printer

3. Repeat the the following procedures:

Pulling Out the Media

Checking the Position of the Roll Media

Aligning the Media

Checking that the Media is Parallell

Adjusting the Roll Media Position

Making a Test Print

1. Press the Resolution and Shift keys to make a test print to check that the printer is

operating correctly.

Checking the Alignment of the Head (Adjusting the Print Quality)

1. Make sure the printer is not receiving data.

2. Mount an A3, or larger, sheet of cut media or roll media in the printer.

3. Press [Shift]+[CLEANING] at the same time to start printing. During printing, the

printer displays [Accur. Adj Plot].

The printer prints the Print Quality Adjustment Patterns.

Pattern A is for adjusting the repeatability printing position of the black head.

Pattern B is for adjusting the repeatability printing position of the color head.

Pattern C is for aligning the printing positions of the black and color heads.

4. For each pattern (A, B, and C), choose the line (1–7) with the best precision. Use the

following criteria:

Good and bad examples of Patterns A and B

Good and bad examples of Patterns C

5. The printer displays [Pattern A:

enter the number of the best image for Pattern A. Press [ENTER].

KODAK PROFESSIONAL Large

Format 3000 Series Inkjet Printers

4]. Using the [VALUE +] and [VALUE -] keys,

Table of Contents

Professional 3000 series