Kodak 3000 series User Manual page 31

Setting up the Printer
Connecting an Ethernet Cable
The printer comes with a preinstalled 10/100 network interface card that allows network
transmission speeds up to 12.5 MB/s. To connect the network interface card to a
10/100TX network, you need a 10/100TX Ethernet hub with at least one unused port
and an appropriate length of RJ45 modular cable.
1. Connect one end of the RJ45 network cable to the Ethernet port on the network
interface card.
2. Connect the other end of the RJ45 network cable to the port on the twisted pair
Ethernet network hub.
Setting the IP Address
An IP address is required for the printer to be recognized on a network. If necessary,
contact your network administrator to obtain an IP address.
1. Press the Menu key.
2. Press Menu Down ! to select Network.
3. Press Enter.
4. Press value + / value -to increase or decrease the first three digits on the IP address.
Press Enter.
5. Repeat Step 4 for the other 3 parameters of the IP address.
6. Press Back "" twice to return the printer to the online mode.
KODAK PROFESSIONAL Large
Format 3000 Series Inkjet Printers
26