Kodak 3000 series User Manual page 39

Setting up the Printer
Loading Cut Sheet Media
1. Open the cover, and make sure that the hold
lever is in the UP position.
Selecting the Media
1. Press the Media key.
2. Select Sheet.
NOTE:
If you select Roll when a cut sheet is being loaded, the printer gives
the roll media end warning when the end of the cut-sheet is
reached and printing will not complete correctly.
Installing the Media
NOTE:
To minimize the effects of temperature and humidity variations,
leave the media at room temperature for at least a half hour
before installing it in the printer.
1. Insert the media between the pressure roller and the drive roller.
KODAK PROFESSIONAL Large
Format 3000 Series Inkjet Printers
34